Vinga Black Widow black
 |
 |
An advanced Midi Tower case, positioned by the manufacturer in an affordable price segment. The massive platform is equipped with high-quality sound insulation and a powerful cooling system. Of the motherboards, the following solutions are supported: ATX, MicroATX, Mini-ITX. There is a replaceable insert on the top panel — the user can choose between a blind cover isolated from noise and a ventilation duct covered with a dust filter.
The front panel is covered with a decorative cover that opens like a door. If you open the door, you will have access to the front ventilation channel, which is covered by a filter. There are also two connectors for installing 5.25 ″ devices, they are covered with plugs. Although the Vinga Black Widow case is not equipped with regular coolers, the control panel still has a fan speed controller.
In total, the chassis provides 5 seats for fans. The control panel has a card reader. As in other advanced models, this case has a bottom-mounted power supply, which can be used as ATX solutions up to 232 mm long. To cool the processor, it is permissible to use a cooler up to 180 mm high, 415 mm is allocated for discrete graphics. The rear panel has seven expansion slots. From memory drives, you can use three 3.5″ HDDs and two 2.5″ SSDs.
Buy Vinga Black Widow black
All prices 25 →Корпус Vinga Black Widow | 2 119 ₴ |  | |||
| 2 119 ₴ |  | ||||
| 2 216 ₴ |  | ||||
| 2 119 ₴ |  | ||||
| 2 119 ₴ |  | ||||
- Yakіsna sbіrka,
- rich in space and ease of operation, -quiet, -important (for whom it's a plus), - there are no cheap spinners in the kit (for someone else it's a plus) -card reader via USB 2.0 -nuzhe easily soiled plastic (shirshaviy);
- on the other hand, screw slots are expanded on the wall of the case, through which the twist is brought to trim under the hood (it is possible to cut the thread); - there are no cheap spinners (for someone the price is minus); -important, overall (for someone else minus); -card reader - it would be better to combine yoga on a board with a USB 3.0 line, but it would have made the case more expensive |
Great case for your money Made of steel, minimalism, noise (with be quiet fans installed, you can’t actually hear the operation, although I installed six of them), card reader, two fan switches (5-12v), many mounts for ssd (4pcs), many hooks and holes for cable management . The case is a reincarnation of the case from SilentiumPC PAX M70 of 2016, lack of fans (both minus and plus), disappointment awaits for hdd users, since there are no rubber dampers.  Виталий Соловьев: use Vinga Black Widow few months |
What can I say... I'm welcome! For such pennies (50-60 bucks) this is a really good model, but for quiet people who don’t have to waste pennies on fans. I especially can’t stand cheap fans, they start rattling and rustling already after a month of work, then we’ll fill it up with a hitch. Shumka really muffles a little bit in the middle, dampers on HDD mounts are good and mute, but the case itself is wickedly noise-free and mіtsno zіbrany, and navіt mіy 9-rіchnіy hard pratsyuvav richly quieter, lower in Zalman Z1 Neo and at Fractalі, yak brosto jars zalizom (I want the fractal to have a thoroughbred damper with a company logo). Deaf front part does not swell at temperature. In the case of i3 12100F and RTX 3080 MSI Suprim X, the temperature with the open door is lower by as much as 1 degree, the fan is noctuary redux 120mm, 400-900 wraps per blow.
It is even easier to choose a new system, there is a great space in the middle, which gives more "fresh" air. Three shortcomings - as for me, you can replace the card reader with USB-C, so the card reader will require one more FUSB 2.0 slot in the motherboard, and in new series of motherboards they are often deprived of all 1 slot, so you can plug it in (MSI Pro B660-A D4).
The selection is yakisna, everything is well trimmed, the farba is well trimmed, ale rustling, like plastic in the front, which deprives itself of a part of the shkir and servets, so it’s possible to push