Deepcool Matrexx 55 MESH ADD-RGB 4F black (DP-ATX-MATREXX55-MESH-AR-4F)
 |
 |
The Matrexx series of cases from Deepcool are quite advanced gaming platforms that are distinguished by a convenient design and stylish design. A key feature of this model is the presence of a powerful cooling system. The case has four pre-installed coolers (three on the front and one on the back). To optimize airflow, a metal mesh is used as a front panel. The front has a good filtration system.
To add variety to the design, the platform received an interesting ARGB backlight. The choice of colour design can be done either with a button that is placed on the control panel, or through software, through the motherboard. Deepcool Matrexx 55 MESH ADD-RGB 4F computer case shows improved capacity. With a typical Midi Tower chassis size, the motherboard tray can fit an E-ATX motherboard, as well as ATX, Micro-ATX and Mini-ITX. This model is equipped with a viewing sidewall made of a solid panel based on tempered glass, while the glass thickness is a solid 4 mm. For the power supply, a place is allocated at the very bottom, behind a decorative casing. The cable management system will allow you to covertly connect all the wires.
Buy Deepcool Matrexx 55 MESH ADD-RGB 4F black
All prices 57 →Deepcool MATREXX 55 MESH ADD-RGB 4F Tempered Glass без БЖ (DP-ATX-MATREXX5 | 3 779 ₴ |  | |||
Корпус DeepCool Matrexx 55 Mesh ADD-RGB 4F Black (DP-ATX-MATREXX55-MESH-AR | 3 779 ₴ |  | |||
| 3 779 ₴ |  | ||||
Корпус DeepCool Matrexx 55 Mesh ADD-RGB 4F Black | 3 779 ₴ |  | |||
| 3 779 ₴ |  | ||||
Top case BZ bottom rich cooler The cooler for the beast is not enough, but for the deacons it will be good for me  valera: use Deepcool Matrexx 55 MESH ADD-RGB 4F more than year |
In general, a good low-cost blown case. Designed rather for top-end hardware configurations, tk. he's really cold. Externally no frills. Instead of the Reset button, the button to switch and turn off the backlight of the coolers. Plenty of room for cables behind the back wall.
Lots of holes for cable routing to the board. Really cold. Not very convenient installation of the power supply. Although many buildings do.
Only two pockets for hdd. In the back wall, of course, there are a lot of holes for attaching an SSD, but there are no pockets for them in the kit. Documentation can be said to be 'missing'. Some vague leaf. use Deepcool Matrexx 55 MESH ADD-RGB 4F few months |
