Deepcool Matrexx 40 black
Videos 22Photos 16 |
Deepcool's range of enclosures also includes space-saving solutions. This case uses the Mini Tower form factor, platform dimensions are 431x215x431mm. Motherboards of the following formats are supported — Micro-ATX and Mini-ITX. Despite the compact dimensions, the case makes it possible to use an ATX power supply. Almost any tower can be used to cool the processor — the height of the CPU cooler can reach 165 mm.
The graphics subsystem can be built on the basis of a graphics card up to 320 mm long. The Deepcool Matrexx 40 computer case uses an air cooling system. There is one pre-installed 120mm turntable with LED light. The stock cooling system can be easily expanded up to six fans. The platform will be of interest to those users who assemble a compact and at the same time performant PC. Four PCI slots are reserved on the back wall. The front panel has a generous perforation, which gives the front cover a spectacular decorative look. Thanks to the front ventilation duct, the chassis freely receives the necessary fresh air to cool the components. On the side, there is a transparent glass panel that offers a superb view of the interior architecture.
Buy Deepcool Matrexx 40 black
Корпус Deepcool Matrexx 40 Black (DP-MATX-MATREXX40) DP-MATX-MATREXX40 | 1 811 ₴ | ||||
Корпус Deepcool Matrexx 40 Black (DP-MATX-MATREXX40) DP-MATX-MATREXX40 | 1 805 ₴ | ||||
Корпус Deepcool Matrexx 40 Black (DP-MATX-MATREXX40) DP-MATX-MATREXX40 | 2 307 ₴ | ||||
Корпус DeepCool Matrexx 40 Black (DP-MATX-MATREXX40) | 1 804 ₴ |
0 0 1 3 |
Assembly in this case did not cause any problems, there was no problem with blowing, the supplied fan for the case was normal. There is a place for cable management; the metal in the middle of the case is thin, but the board is trimmed. Price
Viglyad Ventilate capacity Sklo However, there is little space for a video card in terms of ventilation. Сергій: use Deepcool Matrexx 40 few months |
Having selected from this company a budget version of a work station for photo processing and video editing, and just for work. Moving the supplied fan to the very bottom of the front panel, blows air over 2 HDDs, and otherwise purchasing a 120 mm RGB fan. The life of all fans was organized through molex and by moving the pins to +5/+12v through a potential difference of 7v, through which the fans operate quietly and not so brightly switched on. There is good ventilation through this case, and the not so hot Xeon E5-2650v2 and GTX1050Ti video card feel better when rendering is again emphasized. Having added a small modification to the appearance of the RGB LED stripes on the frame, the controller is controlled via a radio remote control, live via Molex.
The case is of good quality, the metal is not thin, it does not vibrate at all, the PC works 24/7 and does not require sleeping in the same room, the lighting is like a bedside lamp. There are saw filters on the front panel, magnetic filters and on the bottom for the BZ. It’s important not to remove the stink, otherwise the dog’s hair will lose its name, clean it by hand. The mATX motherboard does not look very aesthetically pleasing, as it is a standard, rather empty place. It is not appropriate to open under the radiator of dropsy, through which you can see the HDD, it looks like there is some stuff there and nothing else. The CPU cooling tower can be placed high, and a video card can also be inserted into a large one, for which there is a place for a stand to avoid a bent textolite. There are insignificant signs of cheapness, but overall satisfaction. Adequate price, good quality of metal, laconic design, welded edge, easy to ventilate, extremely compact The 3.5mm socket is perfect (for the headset), the front lattice panel is a bit flimsy when you clean it, the screws make it difficult to smudge, the expansion slot covers are disposable (loudly) |
Price, quality Don't know Просто пчел: use Deepcool Matrexx 40 less than month |