Zenit ZSh-550 Profi (834613)
Videos 2Photos 8 |
Zenit ZSh-550 Profi | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Before buying always check characteristics and configuration of product with online store manager
Catalog Zenit 2024 - new products, best sales and most actual models Zenit.
Buy Zenit ZSh-550 Profi
All prices 22 →Шурупокрут електричний Зенит ЗШ-550 профі (825830 833961 834613 ) | 1 112 ₴ | ||||
Шуруповерт сетевой Зенит ЗШ-550 Профи | 1 112 ₴ | ||||
Шуруповерт електричний Зеніт ЗШ-550 профи (834613) | 1 112 ₴ | ||||
Дриль шурупокрут Зенит ЗШ-550 профи | 1 112 ₴ | ||||
Шуруповерт Зеніт ЗШ-550 профи (834613) | 1 349 ₴ |
A lot, you can say that semi-professional work with wood. Most often, these are finishing works with clapboard, wood panels, and laminate. It is clear that in such work a screwdriver can not only be useful, but rather necessary. I don't really like batteries. I have one such under-tool and it let me down more than once or twice. The operation of a power tool from batteries in the cold is especially epic. Now I drive it in the trunk as a reserve, but I still consider this mains screwdriver to be the main tool. In terms of price, appearance and technical characteristics, it looks like a supernumerary Chinese product, which cannot be seriously counted on. But in reality, everything is different. Yes, the model is simple, without a separate speed controller, drilling mode, record power and torque figures. But, he performs his main job - tightening self-tapping screws and screws brilliantly. There is enough torque, endurance and the ability to work for a long time with minimal interruptions for a tool in this price category is simply phenomenal. Not heavy, with a comfortable handle and a well-centered self-locking chuck. The controls are standard, everything is in its place. Complete bits are complete slag. After the first use with high-quality self-tapping screws, nothing was left of the profiled ends of the bits, as the cow licked with her tongue. So immediately look for a good set of metal with normal hardening. This device is not suitable for drilling. That is, he, of course, drills, but very slowly and unhurriedly. The speed of rotation of the chuck with the drill is small for this process. |
Decent "low-cost"
At first glance, it might seem that the only advantage of a Zenit handheld power tool is its low price. But the Zenit ZSh-550 Profi screwdriver has other advantages. Firstly, it is quite reliable and unpretentious. If you do not subject the tool to loads for which it is not designed, then this model will serve as an assistant to the home master for a long time. In addition, the screwdriver is well balanced. Thanks to the non-slip plastic body and rubber grips on the handle, it fits well in the hand, allowing you to work in any position.
Not a champion, but gets the job done
This model does not break records for torque (18 Nm is below average). But the torque adjustment clutch has as many as 23 positions (plus the drilling mode). This allows you to fine-tune the tool for driving screws and self-tapping screws into materials of various densities. By changing the force with which the finger presses the start button, you can gently and accurately adjust the rotation speed of the cartridge from zero to maximum (750 rpm).
Due to the fact that the screwdriver has only one speed, its capabilities, like a drill, are very limited. But seven hundred and fifty revolutions and eighteen newton metres is enough for low-speed drilling. For example, using this model, you can drill wooden planks for a picket fence or make holes in corrugated board.
For those who work slowly
The screwdriver has a tendency to overheat. Therefore, every 10 – 15 minutes of continuous work, it is worth giving the tool a rest for 5 – 10 minutes. And experienced users suggest that you need to make sure that your hands do not cover the ventilation grilles on the case. But such features should not scare away the home master who is looking for an inexpensive tool for not the most intensive work. But for professionals who demand the maximum from a screwdriver, you should pay attention to the products of DeWALT, Stanley or other brands of a higher class.