Vitals Professional Em 1612-2BR Protection Plus (110973)

chain, rechargeable, canvas 350 mm, chain pitch 3/8 ", keyless, weight 6 kg

chameleon helmet, blackout: from 5 DIN, up to 13 DIN, turning on filter: 50 ms, grinding mode, 750 g

drill driver, gun, 450 W, 480/1800 rpm, cartridge: keyless, Ø 13 mm, impact mode, reverse, power supply: mains (230 V)

semi-automatic inverter, pulse, synergistic, welding: MMA, MIG/MAG, welding current: from 20 A, up to 200 A, электрод до 4 mm, wire: from 0.6 mm, up to 1 mm, power supply: 230 V, from 160 V, display, снижение напряжения VRD

2000 W, from 50 °C, up to 600 °C, 600 L/min, stepless t control, stepless airflow control, display, weight: 1100 g, case, scraper, putty knife, nozzles, 4

angle grinder, rechargeable, 700 W, saw blade 125 mm, 10000 rpm, motor protection, additional handle, case, charger

brushless, 3000 W, 220 bar, nozzles: fan-shaped, straight line, foam gun, replaceable tips, water suction, weight 52.5 kg

oil-free, electric (230 V), at the entrance 127 L/min, at the exit 76 L/min, 8 bar, 1.52 kW, receiver: 12 L, direct drive

bench grinder, 85 W, 5000 rpm, sharpening: chains, disk: 104 mm

laser level, range: 30 m, accuracy 0.3 mm/m, laser: green, class 2

62 cm³, drive unit mechanical, 2.4 kW, 3.26 hp, 2 operators, boer: diameter 30 cm

plaster mixer, 1600 W, 480/750 rpm, spindle: 2, 2 speeds, soft start, auto-adjustment

stationary, planing: width 82 mm, depth 3 mm, 910 W, double-sided knives, stationary, dual dust out system

maximum 44 kW, 400 V, diesel, 4-stroke, tank 102 L, output 12V, electric starter, autostart (ATS), AVR, liquid cooling, soundproof, hour metre, 2100x930x1250 mm, 994 kg

hammer drilling, 4500 bpm, without a hit, 1400 rpm, chiselling, 1.7 J, brushless motor, power battery, 18 V, not included, LED light, weight 2.2 kg

chain, chainsaw, 800 W, canvas 250 mm, chain pitch 3/8 ", weight 3 kg

chameleon helmet, blackout: from 5 DIN, up to 13 DIN, turning on filter: 50 ms, grinding mode, True Color, 700 g

drill driver, gun, brushless motor, 500/2000 rpm, cartridge: keyless, Ø 13 mm, impact mode, reverse, power supply: battery, 18 H, not included

semi-automatic inverter, pulse, synergistic, welding: MMA, MIG/MAG, welding current: from 20 A, up to 200 A, электрод до 4 mm, wire: from 0.6 mm, up to 1.2 mm, power supply: 230 V, from 160 V, display, снижение напряжения VRD

angle grinder, 900 W, saw blade 125 mm, 7000 – 11000 rpm, speed controller, additional handle