ParkCity Tallin 818/305L
 |
 |
Close
ParkCity Tallin 818/305L | |||||||||||||||||||||||||
| |||||||||||||||||||||||||
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog ParkCity 2024 - new products, best sales and most actual models ParkCity.
Before buying always check characteristics and configuration of product with online store manager
Catalog ParkCity 2024 - new products, best sales and most actual models ParkCity.
Buy ParkCity Tallin 818/305L
All prices 61 →| 4 300 ₴ |  | ||||
ParkCity Tallinn 818 | 3 698 ₴ |  | |||
Парктроник ParkCity Tallinn 818/305l серебро | 3 560 ₴ |  | |||
Парктронік ParkCity Tallinn 818/305L Black (matte) AD00000011631 | 4 349 ₴ |  | |||
Парктронік ParkCity Tallinn 818/305L White | 3 711 ₴ |  | |||
20 more offer(s)
We recommendCompare using chart →
wired, indication: display, front 4 sensor, rear 4 sensor, voice, distance 0.3 – 2.5 m, accuracy 10 cm
wired, indication: display, front 4 sensor, rear 4 sensor, distance 0.3 — 2.5 m, accuracy 10 cm
wireless, indication: display, front 4 sensor, rear 4 sensor, distance 0.3 – 2.5 m, accuracy 10 cm
wired, indication: LED indicators, front 4 sensor, rear 4 sensor, distance 0.2 – 2.5 m, accuracy 10 cm
wired, indication: LED indicators, front 4 sensor, rear 4 sensor, distance 0.3 – 3 m, accuracy 10 cm
Comes with:
- wires for connecting sensors, long, 6 - 7 meters each.
- the button to turn off the front sensors and the range of their operation (three positions), the wire for connecting the button is very short, I advise you to buy 5 meters, three wires, if becoming. in the cabin.
- the cutter is solid, I cut 9 holes without problems (9th under the button).
- paper ruler for marking (marked on it).
- the display is so-so, it seems to be assembled normally, well, the speaker repeats, fastens. The information is not very good, it’s hard to get used to, there are two sides (rear, front), and the number is one, you have to look closely at the waves (((the wire is also very long.
- power wires 3 pcs. Black - mass, red for a brake light (front sensors triggered when the brakes are pressed), green - reverse lamp. I personally extended and connected the red one to the stop signal repeater (the headlight was released. the function of the stop sign and the size, so the size was reset after the last connection). Red can not be connected at all, the front ones will work when the reverse gear is turned on and the buttons are turned on.
- try to buy sensors in color (look at the shade), SENSORS DO NOT COLOR.
I personally bought black for a red car, I thought I would paint it in color from a balloon.
After painting, the sensors went crazy, they worked as they wanted. I had to wipe off the paint and ride with black ones (((