Deepcool Gamma Archer (DP-MCAL-GA)

Massive heatsink

The first candidate to replace the stock Intel and AMD coolers is the affordable Deepcool Gamma Archer. A large heatsink is made of a single piece of aluminium - such a low-cost cooler does not have and cannot have either a copper core or heat pipes. The number of ribs is relatively small, but they are very thick.

Hydrodynamic fan

The 12 cm Deepcool fan is built on a wear-resistant hydrodynamic bearing (it will remain quiet for a long time) and spins up to 1600 rpm (moderate noise 21 dB). It connects to the motherboard via a three-pin connector, that is, it cannot automatically adjust the rotation speed depending on changes in processor temperature (you can manually change the speed in the BIOS settings).

Easy Installation

Attaches the Gamma Archer to the front of the motherboard, no need to install a back plate. Most current Intel processor sockets are supported, with the exception of the rare LGA1366 and LGA2011, and absolutely all AMD platforms.

Sufficient heat dissipation

Effective heat dissipation is guaranteed up to 95 W, but we can say with confidence that the cooler will cope with eight-core 125-W AMD FX 8000 processors, unless, of course, it is overclocked. But the quad-core Intel Core i5 can be easily overclocked - the cooler can cool it down.