Comparison Denon D-M41 vs Pioneer X-HM51

— Built-in memory. Own memory allows you to store and play music and other content directly through the audio system, without the use of external media (which can be damaged or lost). Such memory can be based on hard drives or SSD modules; the first option provides good capacity at a low cost, the second one is faster and more reliable.

— USB port. A classic USB port, which in this case is usually used for flash drives, external hard drives, or other devices with a mass storage function, such as miniature audio players. USB functionality includes at least direct playback, but other options may be provided, such as file sharing with built-in memory (see above). In addition, if necessary, a connected device (for example, the same pocket player) can also be charged through this port.

— Card Reader. Device for reading information from memory cards; such carriers are very popular in modern electronics. Most often, card readers are designed for various versions of SD or microSD cards, but other options may occur; this point in each case should be clarified separately. The purpose of this function is very similar to the USB port described above: it is primarily used for direct playback, but other functions may occur.

— CD. The presence of a CD drive means at least the abili...ty to work with discs recorded in the CD Audio format (up to 74 minutes of high-quality sound, divided into tracks). In addition, modern audio systems often provide support for discs with MP3 files; in this format, you can fit a whole collection of albums on one disc, but the sound quality is lower.

— DVD. Ability to work with DVD optical discs. These discs are much more capacious than CDs, which allows you to record not only music in high quality, but also movies; in fact, most often DVDs are used precisely as media for storing video. This standard is also gradually being replaced by more modern media, but it is still very far from the final "death". Note that DVD drives are also compatible with CDs, but not vice versa.

— Blu-ray. A high-capacity optical disc format that emerged as a standard for storing high-definition video with multi-channel audio (DVD's capabilities were no longer sufficient for such volumes of data). Blu-ray discs are almost never used for audio content. Because of this, and also for a number of other technical reasons, support for such media is extremely rare in audio systems.

— Vinyl records. Built-in player for playing music from vinyl records. Technically, such media are completely obsolete, but they still have a lot of loyal fans. In addition, quite a few audio systems with this feature support recording to USB (see "Advanced"); this can be useful for owners of "vinyl" who want to transfer their record libraries to more modern media.

In addition to those described above, other types of media may be provided in modern audio systems. For example, some models are equipped with USB type B inputs, thanks to which they can connect to a computer via a USB connector and work as computer acoustics with advanced features (such as copying music from a PC to external media or vice versa).

The number of radio stations that can be stored in the tuner's memory.

By itself, the memory greatly simplifies the work with the tuner. Instead of having to manually search for your favorite stations each time, it is enough to “remember” them and in the future simply select the desired wave from the list in the receiver’s memory. The number of memory cells in modern audio systems can reach several tens; this will be especially useful for residents of metropolitan areas, where there are many stations on the air, as well as for those who often have to travel and tune the receiver to local frequencies.

The total sound power provided by the audio system at maximum volume, in other words, the total power of all the speakers provided by the device (including the subwoofer).

The higher the power, the louder the system will sound and the larger the area it can cover. On the other hand, high power significantly affects the price, dimensions, weight and power consumption of the device. In addition, when evaluating and comparing according to this indicator, it is worth considering some nuances. Firstly, some manufacturers go to the trick and give in the characteristics not the average, but the peak sound power; such numbers can be quite impressive, but they have very little to do with real loudness. So if it seems to you that the claimed power is too high, it's ok to clarify what exactly is meant in this case. Secondly, when comparing, it is worth considering the presence of a subwoofer — it plays an auxiliary role, but it can account for more than half of the total system power. Because of this, for equal total power, a device with a subwoofer may be quieter than a model without a subwoofer: for example, a 2.0 40W system will have 20W per main channel, while a 2.1 40W model may have 20W per subwoofer, and only 10 watts for the main speakers.

Nominal sound power (see "System power") on each of the main channels of the audio system. This indicator is most often indicated in models with a subwoofer (see "Number of channels"); knowing it, you can estimate the power distribution between the main speakers and the subwoofer.

The term "impedance" refers to the resistance of a speaker system to alternating current. Note that in the case of audio systems, this parameter plays a secondary role: it is important for selecting acoustics for an amplifier, and here both of these components are in most cases optimally matched by the manufacturer to each other. Therefore, in fact, information about the impedance can be useful only when looking for speakers to replace the complete ones: it is highly desirable that the new acoustics have the same impedance as the standard ones.

The total frequency range reproduced by the acoustics of an audio system. Measured from the lower threshold of the lowest frequency speaker to the upper threshold of the highest frequency: for example, in a 2.1 system with main speakers at 100 – 22000 Hz and a subwoofer at 20 – 150 Hz, the total value will be 20 – 22000 Hz.

In general, the wider the frequency range, the fuller the reproduced sound will be, the less low and high frequencies will be lost due to insufficient acoustic capabilities. On the other hand, do not forget that the actual sound quality also depends on a number of other parameters — primarily the frequency response. In addition, human audible frequencies range from 16 Hz to 22 kHz; deviations from these values are very small, and the upper limit also decreases with age. Therefore, from a practical point of view, it does not make sense to provide too large a frequency range; and impressive performances like 10 – 50000 Hz, found in top-class models, are usually more of a kind of "side effect" of high-quality speakers (and at the same time — a marketing ploy) than a really significant moment.

— RCA. The RCA interface uses coaxial cables with characteristic "tulip" plugs and corresponding connectors. It can be used to transfer different types of data, however, in this case, it means connecting the audio signal from the preamplifier in analogue format, one channel of audio per connector. RCA is widely used in modern audio technology, but its resistance to interference is very limited.

— Mini-Jack(3.5 mm). Standard connector for most modern portable audio equipment. In audio systems, it is mainly used to connect such equipment — primarily pocket media players. It uses analogue signal transmission, while the resistance to interference, like RCA, is not high, and the quality may even be lower due to the fact that both channels of stereo sound are transmitted over the same cable.

— Coaxial S / P-DIF. An electrical version of the S / P-DIF standard, using a coaxial cable with a “tulip” connector for signal transmission. Do not confuse this interface with the analogue RCA described above — despite the identity of the connectors, these standards are fundamentally different: "coaxial" works in digital format and even multi-channel audio can be transmitted over a single cable. Compared to optical S/P-DIF, this interface is less resistant to interference, but more reliable because electrical cables are not as delicate.

— Optical. One...of the varieties of the S / P-DIF standard is, along with the coaxial one described above. In this case, the signal is transmitted via a TOSLINK fibre optic cable. The main advantage of this interface is its complete insensitivity to electrical interference, while its capabilities are sufficient even to work with multi-channel audio. Among the shortcomings, it is worth noting the high price of connecting cables, as well as the need for careful handling of them.

— Under the microphone. Input for connecting a microphone to an audio system; can use different types of connectors (3.5 mm mini-Jack, 6.35 mm Jack, etc.). This function is mandatory for models with karaoke (see "Advanced"), but can be used for other purposes.

— Instrumental. Connectors used to connect musical instruments (acoustic or bass guitars, keyboards, etc.). Most often they are made in the form of 6.35 mm Jack format sockets. The audio signal from pickups has its own specific characteristics, so the instrument input typically features a higher input level and special impedance matching to ensure optimal sound quality.

The presence in the audio system of its own LCD display. Such displays may have different characteristics: in some models, these are the simplest indicators in which symbols are made up of separate luminous fragments (similar to how numbers are made up of separate “sticks” in the simplest electronic watch); in others — full-fledged matrices with an image formed from pixels. However, anyway, the display makes the control of the audio system more convenient and intuitive, because. can display various additional information — the selected signal source, track name, RDS data (see above), equalizer settings, error messages and much more.

A remote control is included with the audio system. The convenience of this function is obvious: instead of having to approach the device every time to change the operating parameters, you can give a command from the remote control without getting up.