Comparison AL-KO SnowLine 48Li vs AL-KO SnowLine 46E

— Petrol. An internal combustion engine that uses gasoline as fuel. Such motors are often more powerful than electric motors, in addition, they do not depend on the mains connection and the length of the power cord. On the other hand, gasoline snow blowers are usually heavier, have a higher noise level, and emit fuel combustion products into the air. In addition, they are more expensive to operate and require the purchase of fuels and lubricants. These machines are worth paying attention to if you plan to work in large areas and/or in conditions of a lack of electricity.

— Diesel. Diesel internal combustion engines. In such engines, it is easier to achieve high torque than in gasoline ones; for this, however, you have to sacrifice speed, but for snow blowers this moment is not critical. In addition, diesel fuel is cheaper than gasoline. On the other hand, the engines themselves are quite expensive and difficult to maintain, and at low temperatures they are more likely to have problems starting. Therefore, diesel engines have not received much distribution; they are found only in single models of heavy professional snow blowers.

— Electrical(network). Snow blowers with electric motors, usually, are powered by a conventional 230 V network. Compared to gasoline, such devices are lighter, cheaper to operate, produce less noise and do not pollute the ai...r; in addition, they are more compact and easier to store. On the other hand, the power of electric snow blowers is usually much lower, and mobility is limited by the length of the power cord. Such models can be recommended primarily to those who plan to clean relatively small areas in the immediate vicinity of power sources — for example, the yard of a private house or the exit from the garage.

— Electric (battery). Snow blowers with an electric motor powered by a built-in battery. Such models have very low power and limited operating time, while they are more expensive and weigh more than their mains-powered counterparts. On the other hand, the battery snow blower works without being connected to the mains and does not depend on the length of the wire. So such a unit will be an perfect choice for cleaning a relatively small area, near which there are no outlets.

The width of the strip of snow that the snow blower can clear in one pass. The larger the capture width, the fewer passes will be required to process the site, which is especially important on large areas. On the other hand, for processing small spaces, clearing individual paths, etc. significant width is not required (moreover, a “narrow” snow blower will pass more easily in a hard-to-reach place). The larger the capture width, the more powerful the engine, usually, ceteris paribus.

The most compact modern snow blowers have a working width of less than 50 cm, these are mainly electric models of low power, although gasoline units are also found. A width of 50 – 60 cm can be called relatively small, 60 – 70 cm — medium, and in the largest models this figure exceeds 70 cm.

The shortest distance that the snow blower can throw the collected snow.

The minimum range is indicated only for models with adjustable throw distance (see above). The meaning of this parameter is that in fact, long-range snow casting is not always desirable. For example, when clearing a path in the yard of a private house, snow often has to be poured literally next to the path, a little further — and it will fly onto the windows and walls of the house.

Note that the ejection range is a rather conditional value, because. snow (especially loose, freshly fallen snow) tends to dissipate in flight.

The maximum distance to which the snow blower can throw the collected snow (for models without throwing distance adjustment, the operating range itself). This value is rather arbitrary, since snow can be strongly dispersed in flight. Nevertheless, it characterizes the capabilities of the unit well and allows you to compare it with other models.

Long range is important mainly when working on large areas — it allows you to throw snow across the cultivated area so that it does not have to be collected a second time. As for specific figures, the value up to 10 m is considered relatively small, 11 – 15 m — average, and in the most "long-range" models this figure can be 16 m or more.

— Self-propelled design. In self-propelled snow blowers, the built-in motor drives not only the auger, but also the wheels / tracks, ensuring the movement of the device. In this way, you do not have to push the snow blower by hand, which makes work much easier — especially with heavy, powerful models. Most self-propelled models have a transmission that allows you to adjust the speed of movement, as well as the ability to move backward (see "Number of gears").

— Overload protection. A safety system that protects the unit from breakdowns in the event of critical loads. The main reason for the occurrence of such loads is the jamming of the screw — for example, due to the ingress of a foreign object. Therefore, most often, special bolts are used for protection, connecting the auger to the motor gearbox: with a sharp increase in load, the bolts are cut off and the auger is disconnected from the gearbox. Another option is overheating protection that reacts to engine temperature; it is found predominantly in electrical assemblies and can be used alone or in combination with shear bolts.

— Headlights. The presence of a headlight (headlights) in the design of the snow blower allows you to use it for work at night, when there are no other light sources or they are not enough. In addition, in some models, the headlights turn on automatically every time the engine...is started — they play the role of a warning signal that the unit is running.

— Heated handles. Heating system for handles, which the operator holds during work. This feature is especially useful as snow blowers are used in cold weather, and hands can get cold during prolonged use. On the other hand, with small volumes of cleaning, you can completely do with gloves, so heated handles are found mainly in powerful models with internal combustion engines, designed for large volumes of work.

Snow blower motor power in watts. This designation applies to all electrical models; for units with internal combustion engines (see "Engine type"), the designation in horsepower (see above) may also be given.

The higher the engine power, the higher the performance of the snow blower, the better it handles with high dense snowdrifts and icy crust. However, more powerful engines consume more fuel, weigh more and cost more, and their use is not always justified. Detailed recommendations on choosing the optimal power for a specific situation can be found in special sources.

Nominal voltage of the battery used in the unit with the corresponding engine type (see above). Theoretically, a higher voltage allows you to achieve more power, but in fact there is no direct relationship between these points. In addition, manufacturers choose batteries to deliver the intended power, rotational speed, and other performance. Therefore, in the selection and normal use of the unit, this parameter has a secondary, reference value; it may be needed mainly for some specific tasks, for example, searching for a spare battery or a “non-native” charger, or comparing different batteries by capacity (see below).

The name of the battery that is compatible with the device. It helps to buy a spare or find a suitable one in case of a breakdown of the main one.

Features of the battery that the snow blower of the corresponding design is equipped with (see “Engine type”). This item is relevant only for those models, the equipment of which differs from the classic version of the “unit + battery”, namely:

— Not included. No battery included. This option is not very convenient at first glance — the snow blower cannot be used out of the box, you need to purchase a battery. On the other hand, this battery can be chosen at your own discretion, without relying on the decision of the manufacturer. Also, this configuration option is useful for those who already have a suitable battery “in the household”.

— 2 batteries. The presence of two batteries at once in the scope of delivery of the snow blower. This configuration affects the price, but it also has its advantages. The most obvious of them is the doubled battery life: when the charge is exhausted, you can replace the dead battery with a fresh one and continue driving. Moreover, in this way, you can also reduce the breaks for charging: while one battery is in use, the second can be charged. At the same time, such capabilities are rarely required, and most battery-powered snow blowers allow you to purchase a second battery separately if you wish. Therefore, this configuration option has not received much distribution.