Areas of the surrounding space that the parking sensors scan during operation.
-
Back only. Actually, the ability to scan the space behind the car is found in absolutely all parking sensors, but most often this direction is the only one provided for in the design. After all, forward visibility is usually good enough not to cause problems for most drivers, and the main source of difficulty is precisely the observation of obstacles behind the car.
-
Front and back. The ability to track objects both behind and in front of the car. Parking sensors with a similar coverage are designed for those who want to have maximum safety guarantees when manoeuvring. After all, despite the fact that forward visibility is usually much better than backward, low obstacles can still go unnoticed; this is especially true with a high seating position of the driver, for example, in SUVs. Also, forward scanning is useful for novice drivers, as well as for those who need to get used to a new car after using another car with significantly different dimensions. However such parking sensors are usually somewhat more expensive than “purely rear” ones.
—
Wired. Parking sensors, in which the connection of sensors, the control unit and the display unit is carried out only with the help of wires. Such devices are simpler in design and (ceteris paribus) somewhat cheaper than wireless ones, but much more difficult to connect: after all, the wires from the rear sensors have to be pulled to the screen/indicators across the entire cabin, and their length can become a significant limitation for laying possibilities.
—
Wireless. This type includes models in which the connection between the control unit and the display unit is carried out wirelessly, in the radio range. This partially saves the owner from fussing with wires: the transmitter power is usually quite sufficient to install the main unit in the boot and not pull cables to the display through the entire cabin. However, do not be misled: "wireless" refers only to connecting the display, and you still have to lay wires during installation — at least from the sensors to the main unit.
— Overlay on the mirror. As the name implies, this type of parking sensors have a display designed to be installed instead of a rear-view mirror; moreover, such a display can be not only an overlay mounted directly on a regular mirror, but also a separate unit mounted instead of a mirror on the same mount. This can be very convenient due to the fact that the driver does not have to look for a place fo
...r a separate monitor. In addition, in this case, the data necessary for reversing — the view from the mirror and the readings of the parking radar — are compactly grouped in one place; and some models allow you to connect a reversing camera to the screen. The connection to the control unit can be either wired or wireless (both described above). However, the installation of overlays is combined with additional difficulties, because. mirrors in different models of cars can significantly differ in shape and dimensions.The number of front sensors that are standardly supplied with the parking sensors. For the meaning of the quantity in general, see "Rear sensors". Also note here that, since forward visibility is usually much better than backward, there are often only two front sensors — to cover the most problematic viewing areas (and not the entire forward direction). However, there are also "full-format" options for 4 sensors.
—
Digital distance indicator. With this function, the parking sensors not only signal the approximate distance to the obstacle, but display the specific value of this distance in the form of numbers (usually in metres) on the display. Such information is much more accurate and clearer than the data from the LED panel and, moreover, from the sound signaling device.
—
Voice notification. This function expands the possibilities of sound signaling: the device can emit not only certain conditional signals, but also voice various information in a voice format. The specific possibilities may be different, depending on the model: some parking sensors speak information about the distance at certain intervals, others specify which side the sensors were triggered from (not only front or rear, but also right or left) and much more.
—
Sound volume adjustment. The ability to change the volume of the parking sensors sound signals at your discretion: for example, when parking on a noisy street, increase it so that you are guaranteed not to miss a single notification, and reduce it in a quiet underground garage so that the sounds “do not hit your ears”. In addition, the perception of sounds may differ for different people, and the same signal may turn out to be normal for someone, too loud for someone, and excessively quiet for someone.
—
Memory of external elements. Remote elements mean various external parts of a car located in the area of \u200b\u200bbumpers: "reserve wheels", tow bars, "kenguryatniki" grilles, etc. Their location is different, and it is possible that such a part falls into the range of parking sensors and is perceived as an external obstacle. To avoid such false positives, a memory function is provided: the device “remembers” the pattern of the reflected signal from the remote elements, and issues a warning only when real obstacles are within the detection distance.
—
Video input (to the camera ZV). A connector that allows you to connect a reversing camera to the parking sensors. This provides a very high degree of control over the situation: if the parking sensors themselves, at best, signal the approximate location of obstacles, then the camera allows you to see what exactly is on the way (moreover, in the “dead zone” right behind the bumper, not blocked by rear-view mirrors). Of course, to view data from the camera, a full-fledged display is required: some parking sensors have their own (see "Indication"), others provide connecting an external monitor via a video output (see below).
—
Video output (to the monitor). A connector for connecting a fully functional external screen to the parking sensors — for example, a car TV or a GPS navigator. Usually found among devices with LED bulbs or a sound signal (see "Indication"): much more information can be displayed on an external screen than on standard indicators. However, even in models with their own display, this function may be useful — after all, the capabilities of this display can be much more modest than that of a full-fledged screen.
—
Reversing camera included. The meaning of this feature is already clear from the name: by purchasing such a kit, the driver immediately receives both the parking sensors and the rear-view camera, and both of these devices are mutually compatible (whereas when buying separately, problems may arise). Rear-view cameras are used to allow the driver to see blind spots — primarily behind the car (hence the name), but "eyes" are also available for front / side view.
