Comparison Arktek Radeon RX 550 AKR550D5S4GH1 vs Asus Radeon RX 550 PH-RX550-4G-EVO

The frequency of the graphics processor of the graphics card. As a general rule, the higher the frequency of the GPU, the higher the performance of the graphics card, but this parameter is not the only one — a lot also depends on the design features of the graphics card, in particular, the type and amount of video memory (see the relevant glossary items). As a result, it is not unusual for a model with a lower processor frequency to be more performant of two video cards. In addition, it should be noted that high-frequency processors also have high heat dissipation, which requires the use of powerful cooling systems.

The maximum resolution supported by the graphics card — that is, the largest image size (in pixels) that it can display on an external screen.

The higher the resolution, the clearer and better the picture is. On the other hand, with an increase in the number of pixels, the requirements for computing power and, accordingly, the cost of a graphics card increase. In addition, do not forget that you can only appreciate the full benefits of high resolutions on monitors with the appropriate characteristics. On the other hand, in the graphics settings, you can set lower resolutions than the maximum; and a good resolution margin means a good overall performance margin.

As for specific values, the actual minimum for modern video cards is 1600x1200, but higher rates are much more common — up to Ultra HD 4K and Ultra HD 8K.

HDMI interface version supported by the graphics card. For details about HDMI itself, see above, and its versions can be as follows:

— v.1.4. The earliest HDMI standard found in video cards; was introduced in 2009. Despite its “venerable age”, it has good capabilities: it supports 4K video (4096x2160) at a frame rate of 24 fps, Full HD (1920x1080) at a frame rate of up to 120 fps, and is also suitable for transmitting 3D video.

— v.1.4b. The second improvement of the above v.1.4. The first update, v.1.4a, introduced support for two additional 3D video formats; and in HDMI v.1.4b, mostly minor improvements and additions to v 1.4a specifications were implemented, almost imperceptible to the average user.

— v.2.0. Standard introduced in 2013 to replace HDMI v.1.4. Thanks to its full 4K support (up to 60 fps), it is also known as HDMI UHD. In addition, there is enough bandwidth for simultaneous transmission of up to 32 audio tracks and up to 4 separate audio streams, and the list of supported frame formats has been replenished with ultra-wide 21:9.

— v.2.0b. The second update of the HDMI 2.0 standard described above, which differs primarily in HDR support. However, HDR compatibility itself appeared in the first update, v.2.0a; and version 2.0b added the ability to work with HDR10 and HLG standards.

— v.2.1. The newest common HDMI standard released in 2017. Capable of providing a frame rate of 120 fps in ultra-high resolu...tion video signal — from 4K to 8K inclusive; some improvements related to the use of HDR were also provided. Note that all the features of HDMI v.2.1 are available only when using cables marked Ultra High Speed, although basic functions work through ordinary cables.

The version of the DisplayPort and/or miniDisplayPort interface used by the graphics card. For the interfaces themselves, see the relevant help items; here we recall that they differ only in the type of plug. So the list of versions for both cases is the same, it looks like this:

— v 1.2. The earliest widely used version (2010). However, already in this version, 3D compatibility and the daisy chain mode appeared. The maximum fully supported resolution when connecting a single monitor is 5K (30 fps), transmission up to 8K is possible with certain restrictions; a frame rate of 60 Hz is supported up to a resolution of 3840x2160, and 120 Hz — up to 2560x1600. And when using daisy chain, you can connect up to 2 2560x1600 screens at 60 frames per second or up to 4 1920x1200 screens at the same time. In addition to the original version 1.2, there is an improved v 1.2a, the main innovation of which was support for AMD FreeSync, a technology used in AMD video cards to synchronize the refresh rate of the monitor with the actual frame rate output by the video adapter.

— v 1.3. An update introduced in 2014. The increased bandwidth made it possible to provide full, without restrictions, support for 8K at 30 fps, as well as transmit 4K images at 120 fps, sufficient for 3D work. Resolutions in daisy chain mode have also increased — up to 4K (3840x2160) at 60 fps for two screens and 2560x1600 at the same frame rate for four. Of the specific innovations, it is worth me...ntioning the Dual Mode mode, which allows you to connect HDMI and DVI devices to such a connector through the simplest passive adapters.

— v 1.4.Version introduced in March 2016. Formally, the bandwidth has not increased compared to the previous version, but thanks to signal optimization, it became possible to work with 4K and 5K resolutions at 240 fps and with 8K at 120 fps. However for this, the connected screen must support DSC encoding technology — otherwise, the available resolutions will not differ from version 1.3. In addition, v 1.4 added support for a number of special features, including HDR10, and the maximum number of simultaneously transmitted audio channels increased to 32.

—v 1.4a. An update released in 2018 "quietly" — without even an official press release. The main innovation was the update of Display Stream Compression technology from version 1.2 to version 1.2a.

The number of stream processors provided by the graphics card.

A stream processor is a separate part of the GPU, designed to execute one shader at a time. Shaders, in turn, are small programs responsible for creating individual graphic effects (for example, surface gloss, glare on the surface of water, motion blur, etc.). Accordingly, the more stream processors provided in the design, the more shaders the graphics card can simultaneously execute and the higher its computing power. However, in general, this is a rather specific parameter, relevant mainly for professional developers, modders and enthusiastic gamers.

The version of the stream processors used in the graphics card.

For more details on the processors themselves, see the relevant paragraph above. And the version data is ancillary information; it may be necessary for some specific tasks such as developing special software, but ordinary users and even advanced enthusiasts rarely need it. Detailed information about this parameter can be found in special sources.

The number of texture units contained in the GPU.

As the name implies, such blocks are responsible for working with textures. Texture, in turn, is one of the main elements of 3D graphics: an image superimposed on the surface of a three-dimensional object (similar to, for example, wallpaper pasted on a wall or a label on a box). The specific purpose of texture blocks is to select textures and apply them to the surface of geometric objects. Other things being equal, more of these blocks means higher graphics performance; although in general this is a rather specific parameter, intended mainly for specialists and rarely needed by ordinary users.

Maximum power consumed by the graphics card during operation. This parameter is important for calculating the total power consumed by the entire system and selecting a power supply that provides the appropriate power.

The total length of the graphics card.

In this case, the length means the size of the device from the plate with connectors (which is attached to the back wall of the system unit) to the opposite side. The plate itself and the outwardly protruding connectors are usually not taken into account.

Data on the length of the graphics card is needed primarily in order to assess whether there is enough space for it in a particular case. In addition, longer boards, usually, have more advanced characteristics (although there is no hard dependence here, and video adapters of similar class may have different lengths). As for specific values, the most compact solutions nowadays have a size of 150 – 200 mm or less ; an indicator of 200 – 250 mm can still be considered relatively small, 250 – 290 mm — medium, and many models (mostly advanced) have a length of more than 290 mm.